Structural Bird Exclusion

 Listed below are bird control exclusion products that prevent perching, loafing, and nesting in and around buildings. The methods we use are site specific, we base our recommendations on bird biology and building structure. The methods may include bird netting, bird spikes, bird wire, electric shock track and other techniques.

  • Bird Netting 

Netting is the strongest and most versatile bird exclusion system in the world. This system denies pest bird’s access to any architectural configuration, including courtyards, roof tops, overhangs, parking garages, etc. One of the most important aspects of using bird netting successfully is to find every opening where birds are entering and leaving the structure. The netting needs to enclose or block off each avenue used for access by the birds. It is also important that the bird netting be kept from surroundings that could damage it.

  • Bird Spikes 

The term "bird spikes" sounds harsh and harmful but this is a humane and highly effective bird deterrent. The product is made of pre-formed spike strips that have wires attached to a base which can be glued or screwed in place. The strips are designed so that they do not collect debris and are virtually invisible from normal viewing distances. They can be installed on nearly any architectural configuration. Birds that normally roost, land or nest on the area where the bird spikes are installed will not be harmed, because as birds approach the area they see there is no solid place to land and do not actually come in contact with the spike.

  • Bird Wire

Birdwire is a spring-tensioned wire system designed to create an unstable landing area that is widely used throughout the U.S. because it is very low-profile. This is an excellent and effective solution for bird control when it is critical not to detract from the visual appearance of a building or structure. Bird wire is especially designed for larger birds like seagulls, pigeons and crows when they are not present in large numbers. The posts and spring-tension bird wire is permanently installed and is very effective if correctly implemented for the proper application. It also carries GSA approval for historic buildings.

  • Electric Shock Track 

Used as a deterrent method to prevent perching and loafing on ledges and other surfaces. This system produces a harmless but noticeable electric pulse that deters nuisance birds from those areas. All surfaces are cleaned and prepped prior to installation. Electric track is adhered using a specific glue bond.

  • Grid System 

Grid Systems are an effective bird deterrent used to protect flat rooftops and large open spaces from gulls and other soaring birds. By suspending a series of lines above the surface area in the form of a grid, an uncomfortable landing zone for soaring birds is created, which teaches them to find new areas to roost and nest. Grids sections are custom designed based on the type of desired species to control and roof area.

  • BirdSlide™

BirdSlide™ is used on ledges, edges, almost anywhere there is a flat, narrow ledge for birds to perch on. It is an effective deterrent where there is heavy pressure from nesting. This is a good application where other products like netting may be visually unacceptable. The BirdSlide™ system completely protects the ledge against all bird species because birds cannot get a grip and slide right off the ledge. The product comes in gray or beige, but can be painted to match any color.

  •  Wire Spiders 

Thin, stainless steel rods rotate in the breeze and wave menacingly, interfering with birds as they attempt to land deterring gulls, pigeons, and other large birds, from landing in open spaces such as flat roofs or air conditioning units, as well as on street lights and other hard-to-protect areas. It is inconspicuous from short distances and practically invisible from 50 feet or more. Its unobtrusive design allows for use in even high visibility areas like shopping/walking promenades and parking lots.

  •  Xcluder™ 

100% non-toxic, environmentally safe blend of coarse stainless steel and poly fibers to form a highly resilient and impenetrable barrier against nuisance birds. Used in nesting cavities on building structures.

  • Agrilaser Autonomic 

The Agrilaser Autonomic is a fully automated bird repelling system, providing continuous bird deterrence with the use of a specialized laser keeping birds away 24 hours a day, 7 days a week.